mapbench
Language note: Full JA translation for this tool is not ready yet. Showing the English tool interface. More localized content will be added over time.
Interactive toolSun & Moon

Moon Phase by Date

Moon Phase by Date is built for one specific calculation rather than a generic map page. Enter the requested values, review the result immediately, and use the method note to understand what the number represents.

✓ No account required✓ Worldwide✓ Shareable results
Tool workspace
Set your inputs, inspect the map and read the result
Loading tool…
Simple workflow

How to use this tool

  1. 1Enter the requested values.
  2. 2Review the calculated output.
  3. 3Check the method and assumptions before using the result in a decision.

Quick answer: Estimate the Moon's phase name for a selected date. Coverage: Worldwide. No account is required.

Moon phase by date is a cycle estimate, not a precision lunar ephemeris

The familiar phase names—new, first quarter, full and last quarter—describe positions within the approximately 29.53-day synodic cycle. This tool estimates where a selected date falls in that cycle and translates the result into a familiar phase label.

Mean-cycle calculations are excellent for planning and education but can differ from an astronomical ephemeris by hours around exact phase events. Use an observatory-grade source when exact conjunction or opposition time matters.

When this tool is useful

Use Moon Phase by Date when the question matches the method the page actually uses. Typical workflows include:

  • Use the output as a planning or teaching reference, then move to an official or specialist source if the result affects legal, safety, engineering or financial decisions.
  • Run the same workflow for locations in different countries while keeping units and assumptions consistent.
  • Answer a one-off question about moon phase by date and keep the result tied to a visible map or explicit input.

Worked examples

These examples are meant to show how to interpret this kind of output, not to replace the values produced from your own inputs.

  • Equinox comparison — Calculated day length is about 12h 07m at the Equator and changes with latitude because of solar geometry and the sunrise/sunset convention used.
  • Golden hour — The useful light window changes with latitude, season and local horizon. Treat calculated times as planning guidance, especially around obstructed horizons.
  • Clock time — Solar geometry and civil clock time are different layers. Time zones and daylight-saving rules shift the clock label, not the Sun's position.

How to interpret the result

The most common errors come from using a correct result to answer the wrong geographic question. Keep these points in mind for Moon Phase by Date:

  • For photography, plan around sun altitude, not clock time: golden hour is an altitude band, so its clock time migrates with the seasons even at a fixed place — the calculator's windows handle that for you.
  • When comparing day length across a year, remember the curve is your latitude's signature: near-equatorial sites hover at twelve hours while high latitudes swing wildly. Choose expectations by latitude, not by calendar folklore.

Limits & appropriate use

Solar arithmetic's limits are small but real: the official zenith encodes average refraction, not today's atmosphere; coordinates are rounded to your input's precision; and terrain is absent unless you add height yourself — a mountain rises the sun late and the formulas won't know. Time adds the political layer: zones and DST are human law, and western edges of big zones (Spain, western China) make solar noon wander hours from clock noon. Every output here therefore carries its convention and both clocks, because an unanchored sunrise time is an argument, not a fact.

Lunar and seasonal outputs carry their own gentle limits: phase from the synodic approximation is hours-precise, which outruns every planning need but not ephemeris science; day length is geometric daylight, not sunshine, and clouds belong to climate's department. Escalation is rare and well-defined — astronomical almanacs and ephemerides for science, terrain-aware apps for mountain photography, and the tz database maintainers whenever a government invents a new DST rule at 48 hours' notice, as they delight in doing.

  • Science-grade ephemerides → astronomical almanacs/JPL horizons.
  • Mountain sunrise/sunset → terrain-aware horizon adjustments.
  • Legal daylight definitions → jurisdictional statutes (they vary!).

Data & methodology

Uses mean synodic-month age from a reference new-moon epoch. Solar times use the NOAA algorithm with the 90.833° official zenith; lunar phase uses the synodic cycle. Timezone geometry comes from the open tz database resolved locally in your browser.

For source details, licences and model limitations, see Data Sources and Methodology.

Key terms worth knowing

Equation of time
The sundial-vs-clock correction from orbit eccentricity and tilt.
Civil twilight
Sun between 0° and −6°: usable outdoor light without lamps.

Related tools

If this page answers only part of your question, these tools use a nearby but different method or dataset.

Editorial guidance: MapBench explains the method and limitations so the tool can be used as a transparent reference, not as a black-box answer. For legal boundaries, safety-critical routing, surveying, engineering, regulated decisions or official statistics, verify the result with the responsible authority or a qualified professional.

Category: Sun & Moon. Results are intended for everyday analysis and planning unless a page explicitly states otherwise.

Common questions

Frequently asked questions

Clear answers about the calculation, accuracy and appropriate use.

What does this tool calculate?

Estimate the Moon's phase name for a selected date.

Do I need an account?

No. The calculator works without creating an account.

Can I use the result for professional work?

Use it for planning and analysis. Survey, engineering, legal, or safety-critical work should be verified against the appropriate professional standard or authoritative dataset.

Data & privacy
  • ✓ Browser-first processing where supported
  • ✓ External data sources are documented
  • ✓ No account required for public tools
  • ✓ Data sources and privacy policy
Category
Sun & Moon

Sunrise, sunset and day length.

Browse all Sun & Moon →