mapbench
Language note: Full DA translation for this tool is not ready yet. Showing the English tool interface. More localized content will be added over time.
Interactive toolCoordinates

Maidenhead Grid Locator

Convert lat/lng to Maidenhead grid codes (and back) for ham radio and contest work.

✓ No account required✓ Worldwide✓ Shareable results
Tool workspace
Set your inputs, inspect the map and read the result
Loading tool…
Simple workflow

How to use this tool

  1. 1Enter coordinates or a grid code.
  2. 2Read the converted form.

Quick answer: Encode or decode Maidenhead locator squares used in amateur radio. Coverage: Worldwide. No account is required.

Maidenhead locators describe radio grid squares, not street-level positions

The Maidenhead Locator System compresses latitude and longitude into an alphanumeric grid reference widely used in amateur radio. Short locators describe large areas; adding more characters narrows the square. That makes the system convenient for contacts, contests, antenna direction and logging without exchanging a full coordinate pair.

A locator is still an area reference rather than proof of an exact transmitter position. Keep the original GPS coordinate when precision matters, and do not confuse Maidenhead with MGRS, Plus Codes or geohash—each system has a different grid design and typical use case.

When this tool is useful

Use Maidenhead Grid Locator when the question matches the method the page actually uses. Typical workflows include:

  • Answer a one-off question about maidenhead and keep the result tied to a visible map or explicit input.
  • Compare two or more scenarios involving grid square without creating an account or installing desktop software.
  • Use the output as a planning or teaching reference, then move to an official or specialist source if the result affects legal, safety, engineering or financial decisions.

Worked examples

These examples are meant to show how to interpret this kind of output, not to replace the values produced from your own inputs.

  • 40.7128, −74.0060 — The same Lower Manhattan point can be written as 40° 42' 46.08" N, 74° 0' 21.60" W or 18N 583959 4507351. Different formats describe the same location.
  • MGRS precision — For the same sample point, a 10-digit MGRS reference is 18?WK8395907350. More digits increase numeric precision, not the accuracy of the original measurement.
  • Decimal places — Five decimal places of latitude are roughly metre-scale. That does not mean a phone GPS measurement itself is accurate to one metre.

How to interpret the result

The most common errors come from using a correct result to answer the wrong geographic question. Keep these points in mind for Maidenhead Grid Locator:

  • Adopt one storage format — decimal degrees, WGS84, five or six decimals — for every dataset you own, and convert at the edges for display. Mixed notations in one column are the root of nearly every coordinate bug.
  • Sanity-check every pasted pair by eye on a map before using it: latitude/longitude swaps land you in the ocean so reliably that 'the Null Island bug' has a name. A two-second visual check costs nothing and catches most transcription errors.

Limits & appropriate use

Coordinates are lossless in principle and lossy in practice, and every loss is human: swapped axes, wrong hemispheres, datum relics, precision theatre. The converters eliminate the notation problem completely — DMS, UTM, MGRS and Plus Codes are exact translations on WGS84 — but they cannot eliminate the provenance problem: a number without its datum and its source is a rumour. Old NAD27-era documents, hand-typed sheets and seven-decimal CSVs each carry their own failure signature, and the honest tool answers with validation errors and visible pins rather than silent corrections.

The practical boundary is therefore organisational, not mathematical: teams that standardise storage (decimal, WGS84, sane precision) and ritualise the map check enjoy a lossless system; teams that don't accumulate expensive folklore. For work beyond consumer frames — control points, machine guidance, legal description — the escalation is geodetic: licensed surveyors, published transformations and national datums. Everything between a pasted waypoint and that door is exactly where this toolset lives.

  • Datum-critical legacy data → published grid transformations (NTv2/HTDP).
  • Control points and machine guidance → licensed geodetic survey.
  • Aviation/marine charts → the chart's own datum and notation, verbatim.

Data & methodology

All conversions (DMS, UTM with Norway/Svalbard exceptions, MGRS, Plus Codes) run locally on WGS84 with standard geodetic series; round-trips are exact at display precision.

For source details, licences and model limitations, see Data Sources and Methodology.

Key terms worth knowing

UTM
Metre-based zone/easting/northing grid on the WGS84 ellipsoid.
Plus Code
Open Location Code: keyless short codes for any spot, by open math.

Go deeper: guides & original studies

Use these resources when you need the reasoning behind the calculation, a comparison with another geographic method, or an example of the same approach applied across a dataset.

Related tools

If this page answers only part of your question, these tools use a nearby but different method or dataset.

Editorial guidance: MapBench explains the method and limitations so the tool can be used as a transparent reference, not as a black-box answer. For legal boundaries, safety-critical routing, surveying, engineering, regulated decisions or official statistics, verify the result with the responsible authority or a qualified professional.

Category: Coordinates. Results are intended for everyday analysis and planning unless a page explicitly states otherwise.

Common questions

Frequently asked questions

Clear answers about the calculation, accuracy and appropriate use.

Precision?

Longer locators are finer squares — match length to your needs.

Data & privacy
  • ✓ Browser-first processing where supported
  • ✓ External data sources are documented
  • ✓ No account required for public tools
  • ✓ Data sources and privacy policy
Category
Coordinates

Find and convert GPS coordinates.

Browse all Coordinates →